XBee and XBee-PRO ZigBee modules are ideal for hobbyists and educational research as well as applications in the energy and controls markets where manufacturing efficiencies are critical. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimizes the integration with embedde..
This is a simple to use, USB to the serial base unit for the XBee line. This XBee USB adapter (CP2102) unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach USB cable, and you will have direct access to the seri..
Series 2 XBee "ZigBee" modules is the Zigbee XBee Module S2C - 2mW with Wire Antenna - XB24CZ7WIT-004. Its good for point-to-point, multipoint and mesh networks. This module is a little more difficult to get going than the Series 1 - you must set up a "coordinator" module so they are not as plug-and..
This Wireless Zigbee CC2531 Sniffer Bare Board Packet Protocol Analyzer Module USB Interface Dongle is based on a CC2531 chip, which can be used to create a custom DIY Zigbee gateway using Zigbee protocol. Which can be used by any other device using Zigbee communication protocol.Features:Lead Out 8 ..
The Bluetooth XBee USB Adapter FT232RL for Arduino + Micro USB Cable is a compact USB with serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232RL IC, It can be used for programming or communicate with the board which basic Arduino but without USB interface, like Sniffer Nano..