Your Cart

Switches and Relays

This 1 Channel Relay Module, 30A with Optocoupler, isolation 12V Supports module utilizes a high-power 30A relay that can be triggered via the optoisolator with a 12V input. What makes this module ideal for any project is its ability to be triggered either high or low, depending on the onboard ..
Ex Tax:₹300.85
This is a relay module with an automatic delay timer. The module consists of a 12V relay along with a three-digit seven-segment display. The module is based on an N76E003AT20 microcontroller. The module has three buttons one to control the function and others to set the delay time.Features:Increase ..
Ex Tax:₹495.76
This is a 24V 8 Channels Relay Module High and Low Triggering Optocoupler Isolation Relay Module PLC Signal Amplifier Board. The Module is used to control various appliances and other equipment with a large current. It can be controlled directly by a Micro-controller (Arduino, 8051, AVR, PIC, DSP, A..
Ex Tax:₹1,288.14
This is 40A 5 Pin Relay Connector PCB Board Mount Relay Socket PCB Relay Connector has 40A rating with built-in 5 terminals. Relay Connecter with 40 amps contact ratings,12V. PC board Mounting Thermoplastic mold compound material. Features: Relay Sockets with built in 5 Terminals..
Ex Tax:₹29.66
4CH USB to USB Voltage Isolator ADUM3160 1W 1500V 12MBPS 1.5MBPS is based on Analog Devices' proprietary iCoupler technology. Apart from that it is also USB 2.0 compliant which provides fully isolated 1.5 Mbps and 12 Mbps data rates. On top of that isolating 1500V,it requires no external power &..
Ex Tax:₹1,228.81
This is 3D Printer 5A Limit Switch Endstop with 1m Long Cable. The mechanical endstop uses a lever switch to detect when it is activated.The switch is wired up so that when activated, it pulls the signal to LOW/HIGH.The mechanical endstop uses a lever switch to detect when it is activated. The switc..
Ex Tax:₹67.80
This 5V 2 Channel USB PC Intelligent Control Relay Module uses HID technology and high quality so no need use the driver. Just you need to download data which comes inside the application and plug and play. It supports Windows 7, XP 32 systems. The module equips Songle relay and an imported high-per..
Ex Tax:₹360.17
ADUM3160 1 Channel 1500V USB to USB Voltage Isolator Module 12Mbps 1.5Mbps is based on Analog Device's proprietary iCoupler technology and is USB 2.0 compliant, providing fully isolated 1.5M bps and 12M bps data rates, isolating 1500V, requires no external power and no drivers. The USB port is prote..
Ex Tax:₹703.39
This Black DC 5.5 mm Male to Female Plug Extension with ON-OFF Switch can provide you ease to the ON-OFF power supply on your project desk while connecting to the power adapter. If you frequently need to ON-OFF your application then you must have this  30cm long extension which comes with a Mal..
Ex Tax:₹59.32
Capacitive Touch Dimmer LED Dimmer PWM Control Switch Module is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoid the stimulation to eyes.The lamp brightness can be adjusted by..
Ex Tax:₹42.37
With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference. PWM speed regulation widely used to control the start and stop of the motor. The signal input side can be welded to the terminal or pin itself..
Ex Tax:₹42.37
DC To AC SSR-40 DA Solid State Relay Module 3-32VDC/24-380VAC 40A is a solid state relay (SSR) which allows you to control high-current AC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays.One such advantage is that they can be switched ..
Ex Tax:₹250.00
Showing 25 to 36 of 62 (6 Pages)
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site as per our Privacy Policy.