SKU: TECH1783
14 Pin IC Base Socket - DIP type (Pack of 10) is a 14 pin IC Base with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then ..
₹39
Ex Tax:₹33.05
SKU: TECH1784
16 Pin IC Base DIP Socket (Pack of 10) is a 16 pin IC Base with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then pluggin..
₹39
Ex Tax:₹33.05
SKU: TECH1787
20 Pin IC Base (DIP Socket) is a 20 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugg..
₹45
Ex Tax:₹38.14
SKU: TECH1788
24 Pin Narrow DIP IC Socket base adaptor is a 24 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder. The IC base is for a narrow IC. Use this IC b..
₹25
Ex Tax:₹21.19
SKU: TECH1789
28 Pin Narrow IC Socket base adaptor is a 28 pin IC holder, which can be soldered directly onto the PCB with pins spaced at 0.1"(2.54 mm). The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder. The IC bas..
₹30
Ex Tax:₹25.42
SKU: TECH1794
40 Pin IC Base (DIP Socket) is a 40 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plu..
₹69
Ex Tax:₹58.47
SKU: TECH3130
4N35 Optocoupler Phototransistor IC is an infrared emitter diode drives a phototransistor. They are also known as opto isolators since they separate two circuits optically. The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. These are used to c..
₹10
Ex Tax:₹8.47
SKU: TECH1801
6 Pin IC Base (DIP Socket) is a 6 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then pluggin..
₹55
Ex Tax:₹46.61
SKU: TECH1802
8 Pin DIP IC Base Socket (Pack of 5) is a 8 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and th..
₹29
Ex Tax:₹24.58
SKU: TECH3323
AMS1117 1.8V 1A SMD Voltage Regulator IC – SOT-223 Package is a series of low dropout three -terminal regulators with a dropout of 1.8V at 1A load current. AMS 1117 features a very low standby current 2mA compared to 5mA of a competitor. Other than a fixed version, Vout = 1.2V, 1.5V, 1.8V, 2.5V, 3.3..
₹40
Ex Tax:₹33.90
SKU: TECH3224
The Atmel® AVR® ATmega32A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega32A achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus..
₹195
Ex Tax:₹165.25
SKU: TECH1047
Voltage regulators are very common in electronic circuits. They provide a constant output voltage for a varied input voltage. L78M09CV (L7809CV) TO-220 9V Positive Voltage Regulator IC is a positive 9V regulator, meaning it provides +9V as output. The name 7809 signifies two meanings, “78” means tha..
₹30
Ex Tax:₹25.42