XBee Module - Series 1 - 1mW with Wire Antenna - XB24-AWI-001

  • Rs. 1,550.00 INR

TECH1501 Only 1 left!

This is the Xbee 1mW Wire Antenna - Series 1 XB24-AWI-001 module from Digi. It is Easy to use by just powering up and start communicating. Digi XBee 802.15.4 modules are the easiest-to-use, most reliable and cost-effective RF devices we’ve experienced. The 802.15.4 XBee modules provide two friendly modes of communication – a simple serial method of transmit/receive or a framed mode providing advanced features. XBee's are ready to use out of the package, or they can be configured through the X-CTU utility or from your micro-controller. These modules can communicate point to point, from one point to a PC, or in a mesh network.

 

 

The PCB antenna version provides a lower profile footprint for applications with limited space while the wire antenna version allows for more flexibility in adjusting for optimal range at the same output power.

 

The pins on an XBee are 2mm spacing, not 0.1" so they will not fit into a breadboard. For that reason, they work best in our XBee adapter module kit (which has a 250mA 3.3V regulator) or with the USB XBee adapter.

 

Key Features:

  • Outdoor range up to 300 feet (90 m) line of sight

  • Indoor range up to 100 feet (30 m)

  • Data rate up to 250 Kbps

  • 2.4 GHz frequency band (accepted world-wide)

  • Dimensions: 27mm x 24mm x 9mm

This module comes with a wire antenna, its the same price as a chip antenna but 50% more range because of the improved antenna, that is pretty cool!

 

 

Note: Only series 1 modules can work with series 1 type modules you cannot mix up series 1 and series 2 modules to setup communication.


We Also Recommend