STM32F103C8T6 ARM STM32 Board Development System Minimum Arduino Module

  • Rs. 280.00 INR



  • Model: STM32F103C8T6.
  • Core: ARM 32 Cortex - M3 CPU.
  • 72MHz work frequency.
  • Storage Resource: 64K flash memory, 20K SRAM.
  • 0-3.6V power, I/O.
  • Reset (POR/PDR).
  • 4-16MHz crystal.
  • On-board Mini USB interface, you can give the board power supply and USB communication.
  • Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x MAY, 37x I / O ports,
  • Analog-digital conversion: 2x ADC (12-bit / 16-channel)
  • Timers: 3 general timers and 1 advanced timer
  • Debugging Download: Support JTAG / SWD debug interface to download, support for IAP.
  • 2, RT9193: 3.3V regulator chip, the maximum power of 300mASize: 5.3cm x 2.2cm.
  • Number of pins: 48

Product Description

This is a core chip based on STM32F103C8T6 ARM core board, features are as follows:

  • The board based on the most basic MCU circuit, 8M and 32768 crystal circuit, USB power circuit.
  • The basic board is divided into two rows leads to all I / O port.
  • With SWD simulation debug download interface, simple and convenient, debugging speed.
  • The use of the Mirco USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary Andrews mobile phone charger interface.
  • Crystal RTC Epson brand, easy to start, more stable.

Interface description:

  • SWD interface: support for simulation, download and debugging.
  • Mirco USB interface: power supply and USB communication, does not support the download.
  • USART1 interface: USART1 can be used to download the program, or use the USART1 for communication.
  • MCU pin interface: Leads all I / O port pins, easy to connect with peripherals.
  • 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common treatment

Other Device Description:

  • Power LED (PWR): Status indicator power, can determine whether the power supply is stable.
  • The user LED (PC13): to facilitate the I / O test output or indicate the current program.
  • Start to skip to choose the programming mode: (1, user flash memory 2, SRAM 3, memory system).
  • Reset button: reset chip for the user program
  • 8 M Crystal: The frequency can be set to make the system clocked at 72 MHz.
  • 6, 32.768 KHz Crystal: Available for built-in RTC, or for calibration.

We Also Recommend