ENC28J60 Ethernet LAN Network Module

  • Rs. 290.00 INR


The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz.

  • ENC28J60 Ethernet chips, SOP28 package
  • SPI Interface
  • 2X5 connector, can be easily mounted with the MCU
  • Power indicator
  • Single Supply: +3.3 V
  • PCB size: 55x36 mm
Technical Details

This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times

  • You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side
  • If 3.3V is used, the input voltage must not exceed 16.5V
  • Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0
  • 00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445
  • Input voltage range: DC0-25V
  • Voltage detection range: DC0.02445 V - 25V
  • Voltage analog resolutions: 0.00489V
  • DC Input: positive terminal connected to VCC, GND negative pole
  • Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin

We Also Recommend