E3D V6 All metal J-head V6 Hotend Full Kit, 1.75/3mm Direct V6 Wade Extruder
- Nozzle Size: 0.4mm
- PTFE Pipe Length: 1 meter
- Size: 40 x 62.14 mm(DxL)
- Weight: 72 gm.
- Material: Metal
- Type: Long-distance 1.75/0.4mm
- Compatible: For 1.75 filament
- Fan Voltage: 12V
- Power: 40W.
- E3D V6 Type for RepRap 3D Printer
- Print the Widest Range of Materials Possible
- High-Temperature Performance
- High-Quality Printing
- Easy Mounting and Community Support
E3D-v6: Smaller - Easier - Higher Performance.
The E3D-v6 has been redesigned from the ground up. E3D has invested a lot of time and used all of their experience to design E3D's latest and greatest Hot End.
Print the Widest Range of Materials Possible
Building on their signature high temperature performance that allows you to print high temperature materials E3D has now focussed on adding increased functionality with soft and flexible filaments. By providing a PTFE liner tube through the hotend that you can extend into your extruder this gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments like NinjaFlex, FlexPLA and FlexPolyester. This opens up a huge range of new opportunities for your printer.
High Temperature Peformance
With no PEEK or PTFE in hot regions of the Hot End you can reach 300 C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 400C.
This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. Although the latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
The new Heater Block gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.
Reduced Bulk and Z-Height
E3D has focused on cutting as much bulk from the E3Dv6 as possible. This means an overall length of just 62mm and significant reductions in bulk in the X/Y dimensions by using the new injection moulded fan duct.
Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
E3D has eliminated Kapton tape or any other adhesives from the assembly process of v6. The new thermistor simply clamps into place with a small screw, high temperature glass sleeving is used to insulate the thermistor legs. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly kapton taping. No soldering is needed as we supply supply solder free ferrules for making heat-resistant, quick and easy electrical connections to the thermistor legs. Most parts of the hotend simply screw together, the new fan duct simply clips into place and can be oriented in many different directions to suit your particular setup.
High Quality Printing
E3D has kept their acerb thermal transition that gives the high quality printing performance users have come to expect from E3D hotends. A acerb thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combatting ooze. For the user this means sharper more accurate prints that have less stringing, oozing or blobs on the prints.
Adaptable To Suit Your Needs
E3D's range of nozzle sizes gives you more opportunity to choose how you want to print. While the default 0.4mm nozzle gives great prints with a good balance of speed, ease and resolution we are offering a range of nozzles that have special geometries that are tailored to the specific needs of how you want to print. The shape of the tip of the nozzle is key to how the hotend extrudes and flattens a track of plastic. By matching the size of the tip of the nozzles to the width of track of plastic you are able to print with increased resolution in smaller nozzle sizes and with the larger nozzles the geometry has been customized so that you can easily lay down large layers for fast strong prints. Nozzles are easily and quickly changed out because of their hexagonal shape.
Easy Mounting and Community Support
E3D has kept the same 16 mm Groove mount dimensions from v5 to ensure that as much compatibility is maintained as possible with the extensive range of community designed mounts.
E3D has an active user base on many printer forums, including RepRap Forums, Google+, SeeMeCNC, Solidoodle, Ultimaker and many others. E3D also maintains an own E3D Forum where many people share and collaborate on clever solutions for mounting on various printers.
Included(as our first picture show in the listing):
- 1 piece V6 Hotend with nozzle
- 1 piece blue fan duct(injection moduled PC)
- 1 piece fan(12v)
- 1 piece 12v 40w Heater
- 1 piece 100K NTC thermistor
We Also Recommend
A4988 driver 3D Printer Module Stepper Motor Driver for 3D printer Ramp CNC
MK8 Extruder Aluminum Block kit for 3D Printer Accessories
3D PRINTER CONTROLLER BOARD RAMPS 1.4 ARDUINO MEGA SHIELD
12/24V RED PCB heated bed/heatbed MK2 for 3D printer