Brushless BLDC Motor 2200kV w/ Electronic Speed Control ESC 30A

  • Rs. 775.00 INR
  • Save Rs. 224.00 INR

TECH2011

Brushless Motor 2200kV ( Model: A2212) 

 

 

 

Specifications:

 

  • Stator Diameter (mm) - 18

  • Statir Length (mm) - 6

  • RPM KV - 2300

  • Idle Current (A) - 0.2

  • Max Current (A) - 12

  • Max Power (W) - 85

  • Shaft Diameter (mm) - 2

  • Motor Length (mm) - 15.5

  • Overall Length (mm) - 19

 

 

 

Features:

 

  • Low vibration motor great for flying

  • To make aircraft more stable

  • Less operating noise

  • More efficient

  • Bearings long life

 

 

 

Electronic Speed Control (ESC) 30A 

 

 

 

  • Use powerful and high-performance MCU processor. The users can setfunction of use according to their requirements. It fully reflects the smartproperty of our products as a unique advantage. 

  • Support unlimited rotate speed of brush-less motor

  • Support the function of fixed speed 

  • Delicate circuit design with strong anti-interference

  • The starting mode can be set. The response speed of throttle is veryquickly and with very stable linear of speed regulation. It can be used infixed wing aircraft and helicopter 

  • Threshold values of low-voltage protection can be set.

  • With internal SBEC, the operating power to start steering engine isstrong and the power dissipation is small.

  • Multi protection function: protection for abnormal input voltage/protection for low battery/protection for overheat/protection of lowing powerwhen lost of signals from throttle

  • Good safety performance under energization: the motor will not startat the time of power on regardless of the location of pull rod of throttle in controller.

  • Protection for overheat: the output power will lesson to half when thetemperature reaches 100 Degree Celsius during the operation of ESC. The output power willautomatic recover when the temperature is under 100 Degree Celsius

  • Supports with operation setting for all controller and setting ofprogramming panels

  • Set alarm sound. And judge the working situation after power on. 

  • The company has completed intellectual property on the product. Theproduct can be continuously updated and upgraded. The product can be made tocustomers’ requirements. 


We Also Recommend