HC-06 Bluetooth Transceiver HC06 - TTL

  • Rs. 370.00 INR


This is a Bluetooth Module HC-06 for use with any microcontroller. Ituses the UART protocol to make it easy to send and receive data wirelessly. TheHC-06 module is a slave only device. This means that it can connect to mostphones and computers with Bluetooth but it cannot connect to other slave onlydevices such as keyboards and other HC-06 modules. To connect with other slavedevices a master module would be necessary such as the HC-05 version which cando both master and slave.


HC-06 Bluetooth Transceiver Host Slave/Master Module Wireless Serial6pin HC-06 Wireless Serial 6 Pin Bluetooth RF Transceiver Module HC-06 RS232Master Slave II. the core module using HC-05 from the module, leads tointerface to VCC, GND, TXD, RXD, the KEY pin and LED status leads to the foot (STATE)TXD: the sending end , generally expressed as their transmitter, normalcommunication must be connected to RXD another device . RXD: the receiving end,generally expressed as their receiving end, the normal communication TXD mustbe connected to another device. Such as data acquisition , smart car , serialprinters, dot matrix screen control , such as outdoors . Paired with a computer: fit between computers via Bluetooth serial communication with the device ,using the same method and serial



  • A breakout board for easier connectivity

  • Designed for 3.3v level TTL but will accept 5v level as well

  • Built in antenna with a range of up to 30 feet (range is dependent ona lot of things such as any obstacles or walls in the way so it may vary)

  • Supports baud rates from 1200 to 1382400 bps (default is 9600 bps)

  • VCC input voltage 3.3v to 6v

  • Bluetooth Specification v2.0+EDR

We Also Recommend