







- Stock: Out Of Stock
- SKU: TECH2089
- Brand: Mango Filaments
Mango ABS 1.75mm 3D Printing Filament 1kg - White is a high quality filament with 1.75mm diameter and 1kg Spool. This Filaments are Made In India with high quality processing and to promote Indian technology.
ABS stands for Acrylonitrile Butadiene Styrene. ABS is a dimensionally stable and impact resistant. It has a high tensile strength and good overall toughness. ABS is the same material that Lego bricks are made out of and is a great plastic for working parts. Final products made with ABS are very durable, withstand a wide range of temperatures, and tend to be more flexible and less 'brittle' than those made with PLA.
Acetone can be used post-process to provide a glossy look to your finished ABS product. ABS is best used with a heated bed as ABS contracts when cooled and large parts may pull off of a non-heated bed.
Features :
- ABS is dimensionally stable and impact resistant.
- It can also handle temperatures up to 85°C.
- making it well-suited for mechanical parts .
- 1.75mm filament diameter (Dimensional Accuracy +l- O.02mm)
- Vacuumed sealed with desiccunt and box packed.
- Printing temperature 220°C-250°C
- Bed temperature 100°C
- Available in wide range of colors
Specifications:
PROPERTIES |
STANDARD |
UNIT |
VALUES |
Rheological Properties |
|
|
|
Melt Flow
Index 220°C/10kg |
ISO 1133 |
Gms/10min |
18 |
Mould
Shrinkage |
D 955 |
% |
0.4-0.6 |
Thermal Properties |
|
|
|
Vicat
Softening Temperature |
D 1525 |
°C |
97 |
Heat
Deflection Temperature (annealed
80°C/4 hrs, 1.80mpa) |
D 648 |
°C |
93 |
Mechanical Properties |
|
|
|
RockWall
Hardness |
D 785 |
R-scale |
105 |
Tensile
Strength at Yield (50mm/min) |
D638 |
Kg/cm2 |
500 |
Tensile
Modulus (50mm/min) |
D638 |
Kg/cm2 |
27500 |
Flexural
Strength (5mm/min) |
D 790 |
Kg/cm2 |
700 |
Flexural
Modulus (5mm/min) |
D 790 |
Kg/cm2 |
24000 |
Izod Notched
Impact Strength (at
1/4" thickness) |
D 256 |
Kg-cm/cm |
20 |
Other Properties |
|
|
|
Out of stock!Out of stock!This is a DB9 Female Screw Terminal to RS232 RS485 Conversion Board module, RS232 Serial DB9 9-pin to 9 Position Screw Terminal Block. Connector DB9 a..
₹90.00
Ex Tax:₹76.27
Hi-Link AC-DC Power Module HLK-5M05 230V to 5V /5W is plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V ..
₹249.00
Ex Tax:₹211.02
PCB Mounted Passive Buzzer Module is a built-in construction of digital transducers, DC energy provides, extensively utilized in computer systems, pri..
₹30.00
Ex Tax:₹25.42
Sharp GP2Y0A710K0F Infrared Proximity Sensor 100 to 550 cm is a extra-long-range SHARP distance sensor bounces IR off objects to determine how far awa..
₹1,450.00
Ex Tax:₹1,228.81
Raspberry Pi Zero (Without wifi version) is a super cheap single board computer. The Raspberry Pi Zero is half the size of a Model A+, with twice..
₹999.00
Ex Tax:₹846.61
MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a DC-DC boost converter for budget that takes input voltage from as low as 2V to..
₹44.00
Ex Tax:₹37.29
TA6586 Based Motor Driver Module is a H Bridge Remote Control 5A 3V-14V Dual DC Motor Drive Module with DC Motor Speed Controller works on Reverse Pul..
₹198.00
Ex Tax:₹167.80
Vibration Sensor Module Normally Open Type is based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyon..
₹40.00
Ex Tax:₹33.90
Flexible coupling OD:20mm x L:25mm Bore:8x10mm flexible type motor coupling can connect your driving shaft with the driven shaft while it is very effi..
₹150.00
Ex Tax:₹127.12
This GT2 Close-Loop 188mm Long 6mm Width Rubber Timing Belt for 3D Printer. The Power Grip GT2 system is an extension of the HTD system with greater l..
₹80.00
Ex Tax:₹67.80
TJA1050 CAN Controller Bus Driver Interface Module is the interface between the Controller Area Network (CAN) protocol controller and the physical bus..
₹75.00
Ex Tax:₹63.56
The Rotary Decoder Encoder Module KY-040 for Arduino is an incremental electro-mechanical device that converts the angular position or motion of ..
₹52.00
Ex Tax:₹44.07
0.96 inch OLED Display Module SPI/I2C 128×64 – 7 Pin is a display module can be interfaced with any microcontroller using SPI/IIC protocols. It is hav..
₹240.00
Ex Tax:₹203.39
2.2 inch 240x320 LCD color screen TFT SPI serial interface module is compatible with 5110 display and works on ILI9341 driver. ILI9341 is a 262144-col..
₹790.00
Ex Tax:₹669.49
150 RPM Single Shaft L- Shape BO Motor is a Plastic geared Single Shaft L Shaped BO Motor also known as TT Motor. These are light weight plastic body ..
₹59.00
Ex Tax:₹50.00
Out of stock!We use cookies and other similar technologies to improve your browsing experience and the functionality of our site as per our Privacy Policy.
|