This is CH375B USB Disk Read-write Module USB Flash Disk For Arduino. USB interface in the current electronic products accounted for a very large share of the microcontroller. With USB interface communication using the CH375, CH375 is a USB bus interface chip to support USB-the Host and USB-Device/S..
CP2102 USB 2.0 to TTL UART Serial converter Module 5 Pin is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB.Features:Stable and reliable chipset CP2102.USB specification 2.0 compliant with full-speed ..
The ENC28J60 Ethernet Module is a board which contains an Ethernet port and converts Ethernet input into SPI. The board is based on Microchip’s ENC28J60 integrated circuit and it can be used to provide internet connectivity to microcontroller systems like Arduino boards over Ethernet.Since the board..
HDMI male to VGA Female Converter, with 3.5 mm Audio Out converts digital HDMI signal into analog VGA video. This converter module has integrated audio output and it is powered via an HDMI connector, therefore this HDMI Male to VGA Female Adapter requires no external power. Ideal for use with Raspbe..
Max232 RS232 to TTL Serial Interface Module is a board with the MAX3232 transceiver integrated circuit (IC). It facilitates serial communication between TTL and RS232 ports by providing the necessary electrical signal conversion.These boards have a DB9 connector soldered at one end, and four header ..
The MAX485 TTL to RS485 Converter Module converts TTL signal to RS485 for long range, high data rate error prone differential communication. Multiple receivers may be connected to such a network in a linear, multi-drop configuration. These characteristics make such networks useful in industria..
The MiNi ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI.ENC28J60 Ethernet Module utilizes ..
PL2303 - PL2303HX USB to TTL Serial UART Converter Module is a handy, low cost module. Adopt imported controller RS232 TTL, which can stabilize the flash with high-speed 500mA self-recovery fuse for protection.Two data transmission indicator can monitor data transfer status in real time. Reserve 3.3..
RS232 To RS485 Serial Converter Adapter With Terminal Board is best device to carry through remote digital communication between computers with various standard series interfaces converter facilities or intelligent instruments, it needs inter exchange of standard series interface converter of compat..
This is a simple to use USB to RS232 Serial Converter Module. It outputs RS232 level signals on the TX and the RX line. Unlike the cheap converters available in the market, which rarely work, if at all, this converter is highly reliable and can be used on all major operating systems, computers and l..
The USB to RS485 Converter Adapter Support Win7 XP Linux Vista Mac OS provides an easy to use RS485 interface by means of a Virtual Com Port on the user’s system. There are no command structures, whatever is sent to the Virtual Comm Port is automatically converted to RS485 and vice versa. The module..
USB to Serial RS232 TTL UART Converter Module Adapter - CP2102 based is a CP1202 USB UART converter module, a very simple board to quickly connect USB to Serial or USB to TTL or Serial to USB. You can easily communicate with microcontrollers / microprocessors from your computer through the module. I..