FlexiForce A101 Mini Force Sensor is our smallest sensor optimized for high volume manufacturing and ideal for embedding into products. The 2-pin sensors are currently our smallest standard sensor.
The sensors can measure up to 10 lbs.* The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor
How to Adjust the Force Range:
In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance of the feedback resistor (1kΩ min.) To measure lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.
Sensor resistance measured 20 seconds after applied load
Sensor was not attached to any drive circuitry
Typical Performance:
- Linearity (Error) : < ±3% of Full Scale (Line drawn from 0 to 50% load)
- Repeatability : < ±2.5% (Conditioned Sensor, 80% of Full Force Applied)
- Hysteresis : < 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)
- Drift : <5% / logarithmic time (Constant Load of 111 N (25 lb))
- Response Time : < 5 µsec (Time required for the sensor to respond to an input force; Impact load – recorded on Oscilloscope)
- Operating Temperature : -40°C – 60°C (-40°F – 140°F)
- Acceptance Criteria : ± 40% sensor-to-sensor variation
- Durability: ≥ 3 million actuations (Perpendicular load, room temperature, 22 N (5 lb))
- Temperature Sensitivity : 0.36%/°C (± 0.2%/°F) (Conductive heating)
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
Package Includes:
- 1 x FlexiForce A101 Force Sensor
Useful Links:
Vyankatesh Ashtekar –
The best economical sensor you can use to measure small forces ~ 2kg.
Techtonics offers it at an unbeatable price.