Blue 1.8 Inch ST7735 TFT LCD Module is a lovely little display breakout is the best way to add a small, colorful, and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!
The 1.8″ display has 128×160 color pixels. Unlike the low cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!).
The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. It features a microSD card holder so you can easily load full-color bitmaps from a FAT16/FAT32 formatted microSD card.
Features :
- 1.8-inch color screen, support 65K color display, display rich colors
- 128X160 resolution, clear display
- Using the SPI serial bus, it only takes a few IOs to illuminate the display
- With SD card slot for convenient function expansion
- Compatible with the 3.3/5V operation voltage level.
- Compatible with QD-UTFT library for Arduino
Specifications:
Display Color |
16BIT RGB 65K color |
Screen Size |
1.8(inch) |
Type |
TFT |
Driver IC |
ST7735 |
Resolution |
128*160 (Pixel) |
Module Interface |
4-wire SPI interface |
Backlight |
2 White Led |
Active Area (AA area) |
28.03×35.04 (mm) |
Module PCB Size |
44.96×53.47 (mm) |
Operating Temperature |
-20℃~60℃ |
Storage Temperature |
-30℃~70℃ |
VCC power voltage |
3.3V~5V |
Logic IO port voltage |
3.3V(TTL) |
Weight |
18 (g) |
Pin Configurations:
Number |
Pin Label |
Description |
1 |
RST |
LCD reset signal, low level reset |
2 |
CS |
LCD chip select signal, low level enable |
3 |
D/C |
LCD register / data selection signal, high level: register, low level: data |
4 |
DIN |
LCD SPI bus write data signal |
5 |
CLK |
LCD SPI bus clock signal |
Package Includes:
- 1 x Blue 1.8 Inch ST7735 TFT LCD Module with 4 IO 128×160
Reviews
There are no reviews yet.