SKU: TECH3001
12V 1.2Ah Rechargeable Lead Acid Battery is normally use for robots in competition. Wired or Wireless Robots runs for a long time with high speed with this type of battery. Seal Lead Acid (SLA) Rechargeable battery is the most common general purpose battery. Low cost, robust and less maintenance req..
₹675
Ex Tax:₹572.03
SKU: TECH8474
This is a MeTek brand - 12V 10A 120W Switch Mode Power Supply SMPS with cooling fan. It works efficiently and is only low heat. Its output of constant voltage ensures the stability of power supply. The switching power supply is provided with protection against over voltage, short circuit and overloa..
₹625
Ex Tax:₹529.66
SKU: TECH3347
12V 2A DC Power Supply Adapter is compatible to handle up to 2A current so applications like toy cars, CCTV Cameras, Routers, Modems, Cordless Phones, Set-Top Boxes, Wireless Devices, and POS Machines are compatible with this adapter.Features:The adapter is easy to use.Wide input voltage range (110V..
₹155
Ex Tax:₹131.36
SKU: TECH1785
This is a 12V 5A 60W Switch Mode Power Supply SMPS. It works efficiently and is only low heat. Its output of constant voltage ensures the stability of power supply. The switching power supply is provided with protection against over voltage, short circuit and overload. With the anti-interference fun..
₹440
Ex Tax:₹372.88
SKU: TECH7721
This is 12V 8 x AA Battery Clip Slot Holder Stack Box Case for 8 nos of AA battery having 1.5V each to give output of 12V.Features:Battery Holder case for 8pcs AA size batteriesThis battery holder can hold AA standard size 8 batteries, either for alkalescent or rechargeable batteries.This batte..
₹45
Ex Tax:₹38.14
SKU: TECH3320
12V, 1A Power Supply Adapter 2 in 1 pin is compatible to handle up to 2A current so applications like toy cars, CCTV Cameras, Routers, Modems, Cordless Phones, Set-Top Boxes, Wireless Devices, and POS Machines are compatible with this adapter.Features:The adapter is easy to use.Wide input voltage ra..
₹95
Ex Tax:₹80.51
SKU: TECH3210
Brand: Orange
The Orange 11.1V / 1800mAh 3S 30C LiPo battery pack with XT60 connector is equipped with heavy duty discharge leads to minimize resistance and sustain high current loads. The 1800mAh 3S 30C (11.1 v) Orange Lithium Polymer Battery Pack (LiPo) with XT60 connector have a JST-XH style balance connectors..
₹1,590
Ex Tax:₹1,347.46
SKU: TECH8725
18650 3×1 Battery Cell Spacer/Holder a cylindrical battery spacer, made by flame retardant ABS+PC materials, with high-temperature resistance and crack resistance. There are slots on the edge of the holder, can be combined into many different sizes and shapes of the battery pack; after welding nicke..
₹50
Ex Tax:₹42.37
SKU: TECH7802
The 3.7V 1 x 18650 plastic battery holder for lithium batteries case can use 1 x 18650 batteries to supply any power system using 3.7V. the battery holder case is great for the outdoor environment and widely used in automotive, posts and telecommunications, communications, electricity, coal, aerospa..
₹39
Ex Tax:₹33.05
SKU: TECH8724
18650 Li-Ion Single Battery Cell Holder Spacer is a cylindrical battery spacer, made by flame retardant ABS+PC materials, with high-temperature resistance and crack resistance. There are slots on the edge of the holder, can be combined into many different sizes and shapes of the battery pack; after ..
₹35
Ex Tax:₹29.66
SKU: TECH8726
2 X 1 18650 Battery Cell Spacer Holder is a cylindrical battery spacer, made by flame retardant ABS+PC materials, with high-temperature resistance and crack resistance. There are slots on the edge of the holder, can be combined into many different sizes and shapes of the battery pack; after welding ..
₹45
Ex Tax:₹38.14
SKU: TECH1090
This is a simple 2 x AA Battery Holder Box with DC Jack. The 5-inch cable is terminated with a standard 5.5 x 2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino (among a number of other products) allowing you to easily make your project battery powe..
₹60
Ex Tax:₹50.85