Menu
Your Cart

Arduino Mega 2560 ATmega2560 MCU Rev3 - Original

Arduino Mega 2560 ATmega2560 MCU Rev3 - Original
Arduino Mega 2560 ATmega2560 MCU Rev3 - Original
Arduino Mega 2560 ATmega2560 MCU Rev3 - Original
Arduino Mega 2560 ATmega2560 MCU Rev3 - Original
Arduino Mega 2560 ATmega2560 MCU Rev3 - Original
₹2,999.00
Ex Tax: ₹2,541.53
  • Stock: Out Of Stock
  • SKU: TECH7460
  • Brand: Arduino

This is Original Arduino Mega 2560 ATmega2560 MCU Rev3 from Arduino Officials based on ATmega16U2. The Official Arduino Mega 2560 is Rev3 development board based on ATmega2560 microcontroller. The board has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analogue inputs, 4 UARTs (hardware serial ports), a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with an AC to DC adaptor or battery to get started.

The Mega is compatible with most shields designed for the Arduino Uno, Duemilanove or Diecimila. The Arduino Mega can be powered via the USB connection or with an external power supply. The power source is selected automatically. The Arduino Mega2560 has a number of facilities for communicating with a computer, another Arduino or other microcontrollers.

Revision 3 of the board has the following new features:

1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.

Features:

  • ATmega16U2 instead 8U2 as USB to serial converter
  • 1.0 pinout
  • Stronger RESET circuit
  • 5V operating voltage
  • Input voltage (recommended) range from 7V to 12V
  • Input voltage (limit) range from 6V to 20V
  • 40mA DC current per I/O pin
  • 256KB flash memory of which 8KB used by bootloader
  • 8KB SRAM
  • 4KB EEPROM

Specifications:

Model

Mega 2560

Processor IC

ATmega16U2

Operating Voltage

5VDC

Current per I/O pin

40mA DC

Memory

256KB flash memory of which 8KB used by bootloader
8KB SRAM
4KB EEPROM

Input voltage (recommended)

range from 7V to 12V

Input voltage (limit)

Range from 6V to 20V

Length (mm)

102

Width (mm)

51

Height (mm)

30

Weight (gm)

40


Applications:

  • Embedded Design & Development, Industrial, Communications & Networking, Sensing & Instrumentation, Automation & Process Control

Caution:

  • The recommended range is 7V to 12V. If using more than 12V, the voltage regulator may overheat and damage the board.

Package Includes:

  • 1 x Original Arduino Mega 2560 ATmega2560 MCU Development Board

Write a review

Note: HTML is not translated!
Bad Good
Captcha

Microcontroller

ATmega2560

Operating Voltage

5V

Input Voltage (recommended)

7-12V

Input Voltage (limits)

6-20V

Digital I/O Pins

54 (of which 15 provide PWM output)

Analog Input Pins

16

DC Current per I/O Pin

40 mA

DC Current for 3.3V Pin

50 mA

Flash Memory

256 KB of which 8 KB used by bootloader

SRAM

8 KB

EEPROM

4 KB

Clock Speed

16 MHz

USB Host Chip

MAX3421E

Length

101.52 mm

Width

53.3 mm

Weight

36 g

We use cookies and other similar technologies to improve your browsing experience and the functionality of our site as per our Privacy Policy.