Kapton Tape for 3D Printer 30Mtr is having 12mm width and highly used to increase the adhesion of the print materials covering the heating surface. High quality Kapton Tape can be use on the build plate of your Reprap Prusa Mendel or other 3D printer. Kapton Polymide film with silicone adhesive, com..
CNC Mechanical Endstop Switch with cable for 3D Printers uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated. It uses a standard 4 pin 100″ pit..
E3D All Metal Hotend is designed to be used by Reprap Prusa, Mendeland other DIY 3D printers. An Aluminium design enables this hotend to reach higher temperatures. Our hot end comes with a 0.4MM nozzle, and for 1.75MM PLA Filaments. Designed to be used as with a Bowden Long distance Extruder, this c..
MK2 PCB Heatbed 12V/24V for 3D Printer RAMPS1.4 is a Dual Power Supply designed for Reprap Prusa and Mendel 3D Printers and can be used with other 3D Printers too. MK2B is the latest version of the heat bed and features LEDs and 12/24V Dual power supply options. This heatbed is etched directly on 35..
MK8 Extruder Aluminum Block Kit 1.75MM with NEMA 17 L-Bracket Left Hand for 3D Printer is equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while t..
MK8 Extruder Aluminum Block Kit 1.75MM with NEMA 17 L-Bracket Right Hand for 3D Printer is equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while ..
You have a stepper motor, but you need to attach it to your CNC project, is it?NEMA17 Mounting L-Bracket Mount Stepper Motor mount will fit any NEMA17 motor (with 31 mm hole spacing) with four screws. There's two 30 mm long slots, 30 mm apart so you can easily attach it. Made of steel with welded 90..
The Optical Endstop Photoelectric Optical Limit Switch is a reliable stop/switch solution for any type of 3D printer / CNC / 3D tool. The Optical Endstop Switch will immediately output the digital control when the light is blocked and turn the LED on.Using optical transmission principle designed, no..
Small 5V 0.3A Turbo Air Intake Fan are necessary to prevent heat creep, which will affect or damage your extruder assembly, and thus your finished prints. So, Here is the solution High Quality 40 x 40 x 20mm Small Intake Fan Eco-Friendly Customized Turbo air intake fan.Dimensions are 40mm x 40mm x 2..
Smart LCD2004 Display Controller for RAMPS 1.4 is an intelligent controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" included. This panel connects to your RAMPS 1.4 and all further ope..
This 0.2mm Extruder Brass Nozzle for 3D Printer is a fully functional metal extruder. This backward compatible is basically a high-end dual extrusion system, using two interchangeable nozzles.You can use two different wires in the same print job and be able to do their own level, and regardles..
The integrated mainboard driver MKS-GEN L V1.0 for 3D printer has been developed by Makerbase to optimize existing problems on the open-source controller board such as Ramps 1.4. This product offers more flexible options for users.MKS BASE-L is a feature-rich all-in-one electronics solution for Repr..