2.4-inch SPI Interface 240×320 TFT Display Module with Touch

This 2.4-inch SPI Interface 240×320 TFT Display Module has always been one of the hot products in DIY industry and LCD is basically the necessary products during all projects, at the same time, serial port modules are also the popular ones because it takes few IO and the usage is simple. This section of the 2.4S-inch TFT LCD serial SPI integrated features of compact, SPI interface.

Features:

• It is a 2.4″ SPI TFT LCD Screen Module
• 10pins interface.
• Not just an LCD break but include SD card (2GB),
• The LCD drive ic is ILI9341.
• It’s a 240 * 320 (resolution),
• 2.4 inch TFT LCD screen.
• The LCD has a wide viewing angle, the contrast is also very suitable.
• The display interface is serial, it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling.
• SD card use hardware SPI interface (CS / MOSI / MISO / SCK), Not solder pins.

Specifications:

Display Color	RGB 65K color
Touch	YES
Screen Size	2.4(inch)
Type	TFT
Driver IC	ILI9341
Resolution	320*240 (Pixel)
Module Interface	4-wire SPI interface
Active Area (AA area)	36.72×48.96(mm)
Module PCB Size	77.18×42.72(mm)
Operating Temperature	-20℃~60℃
Storage Temperature	-30℃~70℃
VCC power voltage	3.3V~5V
Logic IO port voltage	3.3V(TTL)
Weight	36(g)

Pin Description:

• SDO: Serial clock output
• LED: 3.3V IO and Power Supply pin
• SCL: Serial clock input
• SDA / SDI: Serial data input
• DC: Data / Command selection
• RST: Reset, Low level active
• CS: Chip Selection, Low level active
• GND: Ground
• VDD33: 3.3V Power Supply pin
• UTFT Support

Package Includes:

• 1 x 2.4-inch SPI Interface 240×320 TFT Display Module with Touch

Useful Link: 

• 2.4inch SPI Module ILI9341 Touch