1.8 Inch TFT LCD Display Module SPI Interface 128 x 160 with 4 IO uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 1.8″ display has 128×160 colour pixels. Unlike the low cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor colour and slow refresh, this display is a true TFT! The TFT driver (ST7735) can display full 18-bit colour (262,144 shades!).

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full-colour bitmaps from a FAT16/FAT32 formatted microSD card.

Features :

1.8-inch serial SPI colour display module
Support analogue SPI and hardware SPI
The LCD has a wide viewing angle, the contrast is also very suitable.
Easy to expand the experiment with SD card slot

Specifications:

Screen Size	1.8(inch)
Type	TFT
Driver IC	ST7735
Resolution	128*160 (Pixel)
Module Interface	4-wire SPI interface
Active Area (AA area)	28.03×35.04(mm)
Module PCB Size	34.5×58.0(mm)
Operating Temperature	-20℃~60℃
Storage Temperature	-30℃~70℃
VCC power voltage	3.3V~5V
Logic IO port voltage	3.3V(TTL)
Weight	17 (g)