Menu
Your Cart

0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin

0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin
0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin
0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin
0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin
0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin
0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin
0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin
0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin
0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin
₹290
Ex Tax: ₹245.76
  • Stock: In Stock
  • SKU: TECH3377

The 0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin are one of the most attractive displays available for a microcontroller. There are many types of OLED displays available in the market and the most popular one is the 7-pin SSD1306 0.96” OLED display which we are discussing here. It has a good view angle and pixel density which makes it reliable for displaying small level graphics. Interfacing this IC with MCU can either be done using IIC or using SPI hence helps to save some pins as well. 

So if you are looking for a slim, attractive and efficient display module to make your project look cool with graphics then 0.96 inch OLED Display module might be the right choice for you.

This 0.96″ OLED Display Module offers 128×64 pixel resolution. They are featuring much less thickness than LCD displays with good brightness and also produce better and true colors. The 0.96″ OLED Display Module produces blue text on black background with very good contrast when supplied with DC 2.8V supply. The OLED Display Modules also offers a very wide viewing angle of about greater than 160°.

Features :

  • Monochrome 7-pin SSD1306 0.96” OLED display.
  • 128×64 pixel resolution with 160° viewing angle.
  • Supply voltage 3V – 5V (supports both 5V and 3.31v logic devices).
  • Uses SSD1306 for interfacing hence can communicate through SPI or IIC.
  • Multiple SPI or IIC devices are supported
  • Only Need 2 I/O Port Control
  • Full Compatible with Arduino
  • Factory configured for SPI protocol (can easily change to IIC)
  • Can be easily interfaced with Arduino (Library available).
  • Supports decent graphics of bitmap images.

Specifications:

Driver IC

SSD1306

Pixel Resolution

128 x 64

Operating Voltage(VDC)

3.3 to 5

Operating Temperature (°C)

-30 to 60

Character Color

Blue

Background Color

Black

Length (mm)

27

Width (mm)

27

Height (mm)

4.2


Applications:

  • Used in consumer electronics.
  • Used for Smartwatch, mobile phone, and MP3 displays.
  • Small level gaming displays.
  • Wide range of viewing angle enable to be used in low light.

Package Includes:

  • 1 x 0.96 inch OLED Display Module Blue SPI/I2C 128x64 - 7 Pin

Write a review

Note: HTML is not translated!
Bad Good
Captcha

0.96 inch OLED Display Module Blue SPI/I2C 128x64 Specifications


OLED Driver IC

SSD1306

Resolution

128 x 64

Visual Angle

>160 Deg

Input Voltage

3.3V ~ 6V

Compatible I/O Level

3.3V, 5V

Pixel Color

Blue

Working temperature

-30 DegC to 70 DegC

Module volume ( generous )

27.0 x 27.0 x 4.1mm


Pin Configurations


Pin No:

Pin Name:

Description

1

Ground (Gnd)

Connected to the ground of the circuit

2

Supply (Vdd,Vcc,5V)

Can be powered by either 3.3V or 5V

3

SCK (D0,SCL,CLK)

The display supports both IIC and SPI, for which clock is supplied through this pin

4

SDA (D1,MOSI)

This is the data pin of the both, it can either be used for IIC or for SPI

5

RES(RST,RESET)

When held to ground momentarily this pin resets the module

6

DC (A0)

This is command pin, can either be used for SPI or for IIC

7

Chip Select (CS)

Normally held low, used only when more than one SPI device is connected to MCU

We use cookies and other similar technologies to improve your browsing experience and the functionality of our site as per our Privacy Policy.